DIY Error Codes

Canon PIXMA printer error 5200

Printer error

Do Canon's steps in order: check ink, unplug and restart, run Cleaning, then Ink Flush.

Do Canon's steps in order, and don't tilt the printer when moving it: ink may leak.
Why
Canon (Error Code 5200 page): "Perform all of the following steps in order. Changing the order or omitting steps may cause other problems." "Do not tilt the printer when moving it since the ink may leak out."

Fix it step by step

Step 1 of 7

  1. Check and refill the ink

    • 5 min
    • Canon ink bottles
    • DIY

    Refill any tank that is low.

    Why & details

    Check and refill the ink.

    Canon 5200, step 1: "Check the remaining ink level, and then refill the ink tanks if necessary."

    Did the code clear?

  2. Turn off and unplug the printer

    • 1 min
    • None
    • DIY

    Safety: Do Canon's steps in order, and don't tilt the printer when moving it: ink may leak.

    Power off, then unplug it.

    Why & details

    Turn off and unplug the printer.

    Canon 5200, step 2: "Turn off printer and unplug it."

  3. Plug in and turn it back on

    • 2 min
    • None
    • DIY

    Reconnect power and switch it on.

    Why & details

    Plug in and turn it back on.

    Canon 5200, step 3: "Plug in printer again and turn it back on."

    Did the code clear?

  4. Run print head Cleaning

    • 5 min
    • None
    • DIY

    From the printer panel or the computer.

    Why & details

    Run print head Cleaning.

    Canon 5200, step 4: "Perform print head Cleaning." Canon notes no Deep Cleaning is required, and links Cleaning instructions for the operation panel, Windows and macOS.

    Did the code clear?

  5. Run Ink Flush

    • 5 min
    • None
    • DIY

    Always after Cleaning.

    Why & details

    Run Ink Flush.

    Canon 5200, step 5: "Perform Ink Flush." Canon: "Be sure to perform Ink Flush after Cleaning."

    Did the code clear?

  6. Replace the print heads

    • 20 min
    • None
    • Caution

    Canon's next step if 5200 recurs.

    Why & details

    Replace the print heads.

    Canon 5200: "If the error recurs after taking the above actions, you may be able to resolve it by replacing the print heads."

    Did the code clear?

  7. Request a Canon repair

    • Decision
    • None
    • Pro decision

    Still 5200 after new heads: contact a Canon service center.

    Why & details

    Request a Canon repair.

    Canon 5200: "If the error recurs after replacing the print heads, contact your nearest Canon service center to request a repair." When transporting the printer, do not tilt it, since ink may leak (see Canon's Repairing Your Printer).

    Still showing 5200?Still 5200 → see the partNeed a pro → call a pro

Code cleared. Nice work.

Watch the display for a day to make sure it stays clear.

Back to top

Fixed after any step? Watch the display for a day to make sure it stays clear. Still 5200 after step 7? See the replacement part or call a pro.

What 5200 means

The printer has detected an internal printing error. Canon's fix is a fixed sequence: ink, power-cycle, head Cleaning, then Ink Flush.

More detail
Canon's online manual for the G3060 series (Error Code 5200) gives the cause as "Printer error has occurred." Canon says to perform all the listed steps in order: "Changing the order or omitting steps may cause other problems."

5-minute checks

Full answer & models

Canon support code 5200 means a printer error has occurred. Canon says to refill ink, power-cycle, then run print head Cleaning and Ink Flush, in that order.

Applies to: PIXMA G3060 series
Also searched as: Canon 5200, Canon support code 5200, Canon printer error 5200, Canon G3060 5200, Canon PIXMA 5200 error, Canon error 5200

Call a pro if…

  • 5200 recurs after new print heads (Canon: request a repair).
  • The printer must be shipped: keep it level so ink does not leak.
  • A fix would mean opening the printer housing.

Part you'll likely need

Affiliate link As an Amazon Associate I earn from qualifying purchases. DIY Error Codes earns a commission if you buy through these links, at no extra cost to you; it never affects our recommendations.

Only if 5200 comes back after Cleaning and Ink Flush.

Canon replacement print head for the PIXMA G3060 series (match your model)

Canon's 5200 page says that if the error recurs after the listed steps, you may be able to resolve it by replacing the print heads.

Fits: PIXMA G3060 series

Check it on Amazon

FAQ

What does Canon support code 5200 mean?

Canon's manual says "Printer error has occurred."

Does the order of the steps matter?

Yes. Canon says to perform the steps in order, because changing the order or omitting steps may cause other problems. Ink Flush always comes after Cleaning.

Do I need Deep Cleaning?

No. Canon's 5200 page says no Deep Cleaning is required.

Source: Canon online manual (ij.manual.canon), G3060 series, Error Code 5200. Written by the DIY Error Codes team. Updated 2026-10-17. DIY Error Codes is independent and not affiliated with or endorsed by Canon.